Using the most current Concrete Form MDO technology, our Crown 48 Hardwood combines a proven melamine resin MDO with hardwood veneer.  This high resin content Melamine MDO is more alkaline resistant than traditional phenolic resin based Concrete Form MDO providing a more durable panel for your job site needs.

Features & Benefits

Crown 48 Hardwood is constructed with high strength hardwood face and back veneer and Douglas fir inner plies.  The high resin content Melamine MDO is applied in a one-step process.  All adhesives used are fully waterproof phenolic resins that meet CSA exterior glue bond standards.

Available in 1220 x 2440 mm and 610 x 2440 mm in 17.5mm thickness

  • APA Structurally Certified
    All of our Hardwood products are structurally certified by the APA and undergo rigorous inspection and testing by our Quality Control team.

  • Hardwood Face and Back
    A durable hardwood veneer is used for the face and back providing a smoother pouring surface and a more durable panel than our softwood options.

  • Melamine MDO
    Crown 48 is manufactured with a special Melamine MDO which stands up to high-alkaline concrete mixes better than traditional phenolic based concrete form MDO.

  • Two Piece Inner Plies
    Our two piece, Douglas fir inner ply construction method is engineered to provide a more solid panel that can better stand up to job site wear and tear.

  • Multi-Layer Edge Protection
    For additional moisture protection, all panels are edge puttied then coated with a dark blue, aluminized, resin-rich alkyd edge seal.

  • Factory-Applied Release Agent
    Crown 48 panels come factory coated with Nox-Crete Form Coating, a high quality, water-based, chemically active release agent.

    See Care & Handling for more information

Load-Span Tables

Allowable pressure (kN/m2) for the indicated deflection limits – 17.5 mm thickness – Wet Conditions

Support Span
(center to center)
L/270
(kN/m2)
L/360
(kN/m2)
203 mm 98 98
305 mm 60 45
406 mm 28 21
488 mm 17 13
610 mm 9 7

8′ Perpendicular to supports

Support Span
(center to center)
L/270
(kN/m2)
L/360
(kN/m2)
203 mm 73 73
305 mm 34 34
406 mm 19 17
488 mm 11 11
610 mm 7 6

8′ Parallel to supports

Note: Applicable for plywood across two or more spans
Load Tables developed by APA: The Engineered Wood Association

Features & Benefits

Crown 48 Hardwood is constructed with high strength hardwood face and back veneer and Douglas fir inner plies.  The high resin content Melamine MDO is applied in a one-step process.  All adhesives used are fully waterproof phenolic resins that meet CSA exterior glue bond standards.

Available in 1220 x 2440 mm and 610 x 2440 mm in 17.5mm thickness

  • APA Structurally Certified
    All of our Hardwood products are structurally certified by the APA and undergo rigorous inspection and testing by our Quality Control team.

  • Hardwood Face and Back
    A durable hardwood veneer is used for the face and back providing a smoother pouring surface and a more durable panel than our softwood options.

  • Melamine MDO
    Crown 48 is manufactured with a special Melamine MDO which stands up to high-alkaline concrete mixes better than traditional phenolic based concrete form MDO.

  • Two Piece Inner Plies
    Our two piece, Douglas fir inner ply construction method is engineered to provide a more solid panel that can better stand up to job site wear and tear.

  • Multi-Layer Edge Protection
    For additional moisture protection, all panels are edge puttied then coated with a dark blue, aluminized, resin-rich alkyd edge seal.

  • Factory-Applied Release Agent
    Crown 48 panels come factory coated with Nox-Crete Form Coating, a high quality, water-based, chemically active release agent.

    See Care & Handling for more information

Load-Span Tables

Allowable pressure (kN/m2) for the indicated deflection limits – 17.5 mm thickness – Wet Conditions

Support Span
(center to center)
L/270
(kN/m2)
L/360
(kN/m2)
203 mm 98 98
305 mm 60 45
406 mm 28 21
488 mm 17 13
610 mm 9 7

8′ Perpendicular to supports

Support Span
(center to center)
L/270
(kN/m2)
L/360
(kN/m2)
203 mm 73 73
305 mm 34 34
406 mm 19 17
488 mm 11 11
610 mm 7 6

8′ Parallel to supports

Note: Applicable for plywood across two or more spans
Load Tables developed by APA: The Engineered Wood Association

Download the brochure

Need to take this information with you?  Click to download the PDF version. 

Download the brochure

CROWN 48 H/W – JAN 2018